Sweet! I'll have to check it out one day passing through on my way to Arkansas. Still want to stop by S3 Racing also.
Liked On: 07-26-2019, 10:33 AM
I'm not Erik,.. but my google finger works just fine. https://www.superatv.com/amfile/file/download/file_id/2759/product_id/826/
Liked On: 02-07-2019, 10:59 AM
Erik please post a link to the Polaris Ace SuperATV lift install for folks like me that couldn't find it. I have lots of SuperATV stuff on my Polaris Ranger, Great Products.
Liked On: 02-07-2019, 10:58 AM
I have used the ratchet straps for a few years and had no problems except for a gash in my right hand that required 6 stitches. That was my fault for being in a hurry. Just make sure you think...
Liked On: 02-06-2019, 10:38 AM
Hi guys, I spotted this awesome little ace on ur Facebook page and would like to know the lift and tire size it has. Looking to upgrade some on my sons bike. ...
Liked On: 07-15-2014, 08:07 AM
Liked On: 05-02-2014, 08:30 AM
I took the ace to Glamis for Easter weekend,all I can say is this thing was a blast to drive in the dunes ! I drove from Gecko Road (pad2)to Olds Hill ,if you never been to Glamis is a fun ride and...
Liked On: 04-22-2014, 04:58 AM
Here are those pics. First one shows location. I took this pic on the left side but they're the same on both sides. Second pic shows the rubber one-way valve, and where the reservoir feeds down...
Liked On: 04-16-2014, 07:04 AM
Liked On: 04-15-2014, 11:52 AM
685685686 686 686I decided to put a tint roof instead of a alum. Roof. If all goes as planned our Ace will be done by Friday.
Liked On: 04-08-2014, 12:50 PM
Liked On: 04-07-2014, 12:15 PM
We'll Bristows came through big time. They set me up a entirely new machine and made sure it was ready to go and also installed my fender flares. Had everything ready for me today just had to show up...
Liked On: 04-01-2014, 01:01 PM
I decided that the radiator was to close to the brush guard for my comfort, I could just imagine a small stick puncturing the radiator. So i manufactured a radiator guard out of an old aluminum ...
Liked On: 04-01-2014, 11:23 AM
Liked On: 03-31-2014, 12:47 PM