Polaris ACE Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
what 2" lift kit are people using? pros and cons about it!
 

·
Registered
Joined
·
14 Posts
I just put the High Lifter 2" lift kit on mine. It was a fairly easy install.
 

·
Premium Member
Joined
·
272 Posts
I too am using the 2" High Lifter. As said, a fairly easy install, IF you have the correct tools. It does give about 1½" of actual lift, so with my 26" tires and the lift kit, I do have about 2" more clearance. One word of caution, it DOES increase the center of gravity and makes the machine more prone to tipping over.
 

·
Registered
Joined
·
72 Posts
I installed the Super ATV lift
Compresses the the rear springs (firmer),raises the strut in the front stays stock marshmellow.
26.5 tires 6 ply firmer sidewalls 12" outer bead lock rims 53-ish wide
disconnected the sway bar and never looked back
suspension works much better ,better ride , leans but not stiff in turns, much more stable, stays planted
 

·
Registered
Joined
·
72 Posts
yes it is firmer because the spring is compressed , but without the sway bar compressing the other spring ,suspension works independantly so the ride feels better not jarring
tires with thicker curved outward sidewalls absorbing all the small -midrange impacts like a shock absorber make a better ride
the firmer sidewalls do not tuck under like stock due to the outward curve and a few inches wider make for better handling
 
1 - 7 of 7 Posts
Top