Polaris ACE Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
I bought the utvgiant doors and while riding one of the bolts on the floorboard that holds the latch plate rattled loose. I can't find the size of this bolt anywhere online. Help?
 

·
Registered
Joined
·
173 Posts
You can go on polarispartspitstop.com and look at the diagrams and see exactly which one you lost and it usually tells you the size or at least a part number for it. Hope this helps a little!
 

·
Registered
Joined
·
3,051 Posts
Was it a Polaris stock bolt that came out, or did you get the bolt from UTVGiant?
Either way, if you call UTVGiant I am sure they will tell you what you need, or maybe send you one.
But you'll want to call them, they don't check this forum often.
 

·
Registered
Joined
·
3,051 Posts
I believe those are metric. The size and pitch are M6 x 1.0. They are 1" in length.

You probably aren't going to find one with a torx head like that in your local hardware store, but you should be able to get one with a standard hex head to hold stuff down until your dealer can get you a bolt from Polaris.
 
1 - 7 of 7 Posts
Top