Polaris ACE Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
A bunch of us are riding In Hatfeild McCoy this weekend. On my buddy's ace he got a check engine light come up whenever he'd hit the gas. It had an error code of 520194. Have any of you guys ever experienced this. Also when his ace is in park the digital display says he's in reverse in neutral it says he's in low, while in low it says he's in low, when in low it says he's in hi. Again any one ever experienced this. Any help would be greatly appreciated.
 

·
Registered
Joined
·
525 Posts
I would check the gear indicator switch on the side of the transmission and see if it is loose. I think it is somewhere close to where the shifter shaft goes into the transmission.
 

·
Registered
Joined
·
109 Posts
That code is for stuck throttle it has to do with the throttle position sensor on the gas pedal. Check the wires going to the sensor and after that it could be a bad sensor.
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #6 ·
Thanks for all the information! We will take a look at it tomorrow. Had bigger issues after that had a shock on a friends RZR bust flying into and then breaking his clutch housing
 
1 - 6 of 6 Posts
Top