Polaris ACE Forum banner
1 - 5 of 5 Posts

· Registered
368 Posts
I am with you on the cage and doors, my ace will not fit into the enclosed trailer height wise.
What size trailer do you have? I had a similar experience when I went to the dealer and was expecting to purchase a Sportsman 570, but ended up with the ACE! I have a United 6x12 v nose trailer with ramp door. As the salesman was loading it into the trailer, I was watching the roll cage height, and it cleared with 2 fingers width to spare. He was afraid we were going to have to let some air out of the tires. to get it in. I'm glad it did go in!

When I got home, I had to make sure that the trailer ramp door angled down enough so that the rear wheels would go lower than the trailer floor. Then the roll cage would clear the top of the door opening. If the ramp door was too level, (or almost level with the trailer floor) it would hit the top of the door opening.

I'll have to carry a couple ramps with me to back the trailer tires up on if I can't get the right angle on the ramp door to unload it if I take it somewhere....
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.