Polaris ACE Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
114 Posts
Discussion Starter · #1 ·
To all,
When replacing rear A-Arm bushings I found the left rear brake line contacting the A-Arm. It was in stock factory installed position.
The rubbing had actually worn through the steel. Just a heads up to check this on your 570.

Norm
 

·
Registered
Joined
·
1,747 Posts
To all,
When replacing rear A-Arm bushings I found the left rear brake line contacting the A-Arm. It was in stock factory installed position.
The rubbing had actually worn through the steel. Just a heads up to check this on your 570.

Norm
Thanks Norm......will definitely check mine
 

·
Registered
Joined
·
421 Posts
Thanks Norman. Mines all apart so it's an easy check-fix.
 

·
Registered
Joined
·
57 Posts
Fix for my ace
31118

Lines rubbed through, lost brakes. Had to replace both rear lines. So I added another 3/8” clamp to keep lines away from a-arms. Easy fix.
 
1 - 5 of 5 Posts
Top