Polaris ACE Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
299 Posts
Discussion Starter #1 (Edited)
Polaris rear brushguard finished in expanded metal to match the front brushguard. Light tabs also welded to top bar, ready for reverse lights.
Already installed rear work/reverse lights to top of cage but at least tabs are now there if need be.

Also cut off exhaust outlet tube & rotated away from brushguard as the exhaust was creating a brown spot on the mesh.
20170503_191027.jpg
 

·
Registered
Joined
·
299 Posts
Discussion Starter #3
Thanks! One of easiest mods to do. While I welded mine for strength, mesh can be riveted or screwed on with self-tapping sheet metal screws for those who don't have a welder.
 
1 - 3 of 3 Posts
Top