Polaris ACE Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3,051 Posts
That looks like a great setup! Effective doubled your cargo capacity.
Just don't store, like, bowling balls in the top part. :)

How is it attached at the front, and do the attachments in the rear have washers and nuts on the underside to keep it from ripping out of the plastic?
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #5 · (Edited)
There are two small tabs in the front that go under the roll cage bar. Then a u bolt goes thru them to secure it to the cage. The two rear bolts apear to be factory as they screwed back in the bed once I removed the basket. Look on yours and see if there are not two torx screws in that position, I'm guessing they hold the bed on.
 
1 - 5 of 5 Posts
Top