Polaris ACE Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Replacing solenoid on an 2014 ACE 325 can't get wiring hooded back up correctly....anyone have pictures of one hooked up to share?
 

·
Registered
Joined
·
82 Posts
Which solenoid are you referring to? I need to take out the battery and voltage regulator for replacement and while I'm in that area I can get some pics.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
The solenoid that's beside the voltage regulator has t obe red wires that went to it. i suppose it is the starter solenoid...Thanks
 

·
Registered
Joined
·
82 Posts
Ok I just took off the plastics to access the area, looking at the solenoid on the left post,,,, double red cable, multiple gray with a light blue, and a single gray,,,,, so 3 wire connectors attached to the left post. Right post on the solenoid,,,, just the single red cable that runs back to the starter. There is also a soldered pigtail in the center of the solenoid it has a plug on the other end to connect in the main harness. This is off a 14 325 Ace,, I'll post a pic if you need but currently I don't have a working camera.
 
1 - 4 of 4 Posts
Top