Polaris ACE Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
176 Posts
Discussion Starter · #1 ·
45 miles on my Ace and it's heading back to the dealer in the morning. My speedo needle pulsates and the whole speedo loses power machine still runs fine and the problem is happening intermittently. I double checked all connections, grounds, looked for pinched wires, and even disconnected, charged, and reconnected the battery still no change. I will leave it up to the dealer to dig further. I shall keep you all posted as to how it all turns out.
 

· Registered
Joined
·
176 Posts
Discussion Starter · #5 ·
Given how thorough you were, I'd say you more than did your part, and it's gotta be a hardware failure.
Let us know how it turns out! We want to know.
Maybe we should make this a new thread though. I can fix that, if you're OK with it.
Thanks again yeah you can change the thread no worries just happy to share and learn. I will keep you posted!
 

· Registered
Joined
·
176 Posts
Discussion Starter · #7 ·
Here's a video of what it's doing for those interested. I'm thinking maybe it's the key switch but since I don't have a service book on it yet with the specs on everything I shall wait and see what the dealer comes up with.
 

· Registered
Joined
·
176 Posts
Discussion Starter · #10 ·
Hey everyone! So I got my Ace back today from the dealer!!!! Woohoo missed it too much! So they ended up putting a new speedo in it and reprogramming the ECU. They tested it everyday multiple times everyday until today when I went to get it and it hasn't acted up since. I'm a little surprised that the speedo was the problem considering it seemed more like an ECU issue to me but so far so good. I guess maybe the reprogramming played a big part too.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top