Polaris ACE Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
Im sure its on here but I couldnt find it how to revome steering wheel is it just super tight? Putting on ps dont want to break anything
 

·
Registered
Joined
·
3,051 Posts
It's easy to take a Polaris steering wheel off.
Here's how:
1. Pop the center cap out of the steering wheel.
2. Remove the center nut.
3. Wiggle it, pull on it, yank on it, spray WD-40 on it, swear at it, wiggle and yank it some more, sit there perspiring and panting for a bit, and finally put a steering wheel puller on it.
 

·
Registered
Joined
·
111 Posts
From my experience with an old truck:

1. Abuse the smut out of the wheel, trying to get it loose.
2. Get into truck and leave for parts store for a wheel puller tool.
3. When you back to the bottom the driveway, the wheel will come off in your hands.
4. Gently replace wheel, drive up driveway, and complete repairs.

Matt B
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #4 ·
Thanks guys broke 2 rachets getting nut off the the steering wheel pulled off by hand
 

·
Registered
Joined
·
42 Posts
Mine pulled right off by hand. I used a tie down to a bracket near the seat to hold the wheel from turning as i put a bar on the nut. After i put the new stearing shaft and had to remove the wheel to adjust it for straight i used a pully puller from harbor freight.
 
1 - 5 of 5 Posts
Top