Polaris ACE Forum banner

Winch mount and front brush guard?

3640 Views 6 Replies 6 Participants Last post by  whatwasithinkin
Does anyone know if you can use the Extreme Metal Products winch mount with the Polaris factory front brush guard bumper. I'm just not sure if the included mount for the brush guard will work with that winch mount that gets fastened behind the winch fairlead.
1 - 7 of 7 Posts
When I purchase my Polaris Front Brush Guard it came with a bracket the mount to winch Fairlead. I don't see why it wouldn't work for Extreme Metal Products winch mount.
Platinum ace can you take some more pics on how you mounted your winch. Is it bolted to the extra light mounts. Thanks
The brush guard is a poor place to mount a winch. A good heavy pull would probably break the mounting bolts for the brushguard. The Polaris mount or kfi mount that mounts to the frame is a much preferred method of mounting the winch. Strong and safe
  • Like
Reactions: 2
Platinum ace can you take some more pics on how you mounted your winch. Is it bolted to the extra light mounts. Thanks
Platinum ace3 hasn't been logged on for @ 2 years...so most likely not going to get any photo's.

Join Date:

05-10-2014
.
Last Activity:

05-29-2014 09:54 PM
And Ditto to what Vandal said.

Really not a good spot for a winch. Its bolted to a spot meant to hold light weight lights. And the top 2 bolts on the brushguard really have no strength. I would bet that bumper got destroyed if it ever had to do any pulling.

KFI winch brackets work with the Polaris Extreme Brushguard just fine. I have that setup. Mustang does also.
  • Like
Reactions: 2
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top